Ash blowing furnace for precious metal determination

These kilns are suitable for the soot blowing test operation of precious metal samples, which can protect the heating elements and insulation materials of the kilns from the damage of escaping gases and vapors. The furnace chamber is composed of ceramic muffle furnace liner, which is easy to replace. The ash blowing furnace is equipped with an integrated exhaust hood connected to the exhaust gas system above the furnace door. The ash blowing furnace is equipped with an integrated exhaust hood connected to the exhaust gas system above the furnace door.

Muffle furnace liner is heated on four sides (n 25/13 cup cupola is heated on three sides).

Heating elements and insulation materials are protected by muffle furnace liner.

Muffle liners are easy to replace.

Only class I or class II fibrous materials classified as non carcinogenic according to TRGS 905 shall be used.

The door can be opened in hot state.

The furnace is equipped with a tool rack.

The stainless steel chimney above the furnace door opening is connected to the exhaust system.

The double-layer furnace shell with cooling fan is designed to reduce the peripheral temperature.

The basic function of ntlog of the controller: use a USB flash memory to record process data.

Additional configuration

Base with castors (not applicable to n 4/13 cup type cupola).

Process control and recording are carried out through VCD software package for monitoring, recording and control.

Well furnace with roller cover for larger loading capacity, we can provide well furnace as ash blowing furnace.