Continuous granulation by hot melt extrusion
Hot melt extrusion continuous granulation, customized according to user requirements
The thermal cutter cuts the extrudate directly behind the die with one or more cutters close to the nozzle plate.
The particle length can be adjusted by potentiometer according to the blade speed.
The optimum spring for a particle is usually close to its diameter.
Both melt and wet extrusion can be cut.
Compared with other cutting technologies, the thermal cutting machine has the following advantages:
• fragile extrusions can be cut because they do not break.
• due to the plastic state of the cut particles, they can be further processed and directly formed into spheres.
• food and medicine
• upgraded ANWENDUNGEN - upgraded application
• large scale applications
• R & D
Particle size: 0.1 - 10 mm
Speed: 10 - 500u/ min
Motor: stepper motor
Voltage frequency: 24 VDC 50/60 Hz
Controller: potentiometer
Speed: 0-2000
Output: 0.05-900kg/h
Material: stainless steel
Cooling mode: water cooling / air cooling