Multifunctional parallel crystallization system

Up to 10 independent and flexible reaction modules are concentrated on one equipment to free the crowded laboratory space.

Suitable for a variety of chemical reactions. Such as parallel crystallization, solubility measurement, protein crystallization, organic synthesis, catalytic reaction and metastable zone measurement. It can also be widely used in organic chemical, industrial, pharmaceutical and life sciences.

The compact and modular design of the parallel reaction workstation makes it more effective and flexible.

The parallel reaction workstation has at most ten variable and interchangeable reaction modules (plug and play), and all positions can be used independently.

The machine is very suitable for long-term operation, so it is a partner for long-term test.

The temperature can be set between -30~180 ℃, and the interval is set to 0.1 ℃. You can also program the temperature curve according to your reaction requirements. Each position has independent mixing control, and the mixing range is from 200-4000rpm.

You can also program the mixing through the curve function, so that you can closely monitor the working process.

All settings are made through the intuitive touch screen menu. The touch screen is removable, and the parallel reaction workstation can be placed in the fume hood or safety cover, so that it can be fully controlled externally.

You can perform parallel R and UV measurements at the same time, monitor the temperature of the experiment and / or accurately control the reaction time according to the specifications. Incentive can be used with optional reflux device, high-pressure vessel and inert gas supply.

Online particle size analyzer can be installed for crystallization, polymerization, etc.

The working volume of the reactor ranges from 1ml to 150ml.

It is very suitable for rapid screening and synthesis under standardized and reproducible conditions.

Highly sophisticated R / UV probe with additional temperature measurement.

Can be extended by using R / UV probes

Just plug the probe into the USB socket on the ncentive.

It can accommodate up to 10 probes (one probe for each module). All probe occasional readings are connected through the bus system, which is ready for the microcontroller to collect signals. The microcontroller processes the input data of each module to provide the unique results of each wavelength of each module, including the temperature in the solution / experiment.

You can also use secure, small, simple software on your device anytime, anywhere. All you have to do is.

Connecting the probe to a PC using a conventional USB connection