Cabinet type gas alarm controller

• gas alarm controller is specially designed for industrial sites

• two alarm thresholds (low alarm and high alarm) can be set for any detector on the controller,

So as to realize hierarchical alarm and hierarchical control.

• channel design enables simultaneous monitoring and control of multi-channel gas detectors

• one 128 per channel × 64 dot matrix OLED liquid crystal indicator

• design of combustible gas alarm controller according to Chinese national standard gb16808-2008

• each channel of built-in memory can record 1000 alarm, fault or operation records

Main power: 220VAC (＋ 10%, － 15%);

System capacity: each unit module can be connected with 2 current interface detectors;

Optional measurement units: "%lel", "ppm", "kppm", "ppb", "v/v%", "umol/mol";

Alarm level: low alarm and high alarm, and the alarm value can be set separately;

Display resolution: 1 when range ≥ 100, 0.1 when range ≤ 10, 0.01 when range ≤ 10;

Accuracy / repeatability: ≤ 1%f.s, error: ≤ 2%fs;

Operating temperature: 0~30 ℃;

Humidity range: 0 ~ 95% RH (no condensation);

Power consumption: power consumption per channel <2w;

Standby power: 2 × 12VDC 10Ah lead-acid battery, 2/3-wire 0-22ma current loop, identification signal

0-2ma: no power supply or circuit fault, 2-2.5ma: sensor fault;

Detector access mode: 3mA: calibration status; 4-20mA: concentration output within the range; ＞ 22mA: out of range;

Overall dimensions:

800： 150W × 215H × 83D

880： 230W × 320H × 87D；