Mechanical gas Cat Series fixed gas detection

• remote data monitoring, remote parameter setting and remote program upgrading are available. Dual core system, faster data processing speed;

Touch key + infrared remote control dual operation mode.

• in any case, it is not necessary to open the cover to ensure safe use in flammable and explosive environment.

• equipped with the third generation sensor module. With temperature and humidity monitoring and compensation function;

• industrial grade EMC module, which can cope with harsh site environment and electrical interference;

• black box function: operation, alarm record, over temperature use record, over humidity use record, over range use record.

Detection gas: combustible gas, toxic gas, oxygen, etc;

Response time: depending on the sensor;

Display mode: 320*240 HD color screen 2.0 inches;

Operation mode: infrared remote control, touch button, remote network (such as mobile phone app or upper computer software)

Signal output (optional):1) 4-20ma+rs-485+2 relay 2) other output modes;

Number of relays: two sets of switching value outputs 2A@30VDC Or 0 6A@125VAC ；

Explosion proof certification: Exd Ⅱ CT6;

Protection grade: IP65;

Protection function: lightning protection and surge protection design, intermittent detection, wiring fault-tolerant design, sensor automatic protection function (optional)

Detection principle: catalytic combustion, electrochemistry, infrared, PID;

Installation method: column type and wall mounted type

Recovery time: ≤ 20 seconds (t90-t10); Operating voltage: 12-35vdc (typical 24VDC)

Operating temperature: -40 ℃ -70 ℃;

Temperature range: 10-95% RH (non condensing);

Pressure range: 86kpa~106kpa

201.5×142.5×87mm（L WH）；Temperature and humidity compensation: full range temperature and humidity compensation;

Temperature monitoring range: -40 ℃ ~+120 ℃, accuracy ± 1 ℃;

Humidity monitoring range: 0-100% RH accuracy ± 3%

Types of wireless output signals: WiFi, ZigBee, Lora, 433M, 800m, gprs/3g/4g optional