High temperature furnace with molybdenum disilicide heating device

Equipped with fiber insulation layer, the temperature can be as high as 1800 ℃

With a firm and compact vertical structure, this type of high-temperature furnace

is suitable for all operations requiring high accuracy in the laboratory.

Excellent temperature uniformity and fine design ensure first-class quality.

Depending on the application, you can use various configurations provided by us to expand your kiln.

Ø maximum temperature 1600 ℃, 1750 ℃ or 1800 ℃

Ø the recommended working temperature is 1750 ℃ (for../18 type). When the working temperature is high, the wear will certainly increase. The double-layer furnace shell structure with fan cooling device can reduce the temperature of the outer wall of the furnace

Ø heating on both sides by molybdenum disilicide heating element

Ø high quality fiber insulation material with special backing insulation material

Ø the furnace side wall insulation material composed of groove and tenon block is installed to ensure low outward heat loss

Ø long term durable furnace top insulation material with special suspension structure

Ø only class I or class II fiber materials classified as non carcinogenic according to TRGS 905 shall be used

Ø parallel swing door with chain guide device, used for predetermined opening and closing of the door

Ø two door structure (front / rear), used on high temperature furnace from 276/

Ø labyrinth sealing device ensures minimum temperature loss within the door range

Ø the furnace bottom reinforcement forms a stable loading bottom, which can protect the furnace bottom fiber insulation material from damage and improve the loading capacity (standard configuration since 16/16)

The furnace top is provided with an exhaust port

Ø control the heating element through thyristor

Ø basic function of the controller: use a USB flash memory to record process data

Additional configuration

Adjustable or non adjustable cooling system with frequency controlled cooling fan and motor exhaust valve

Furnace type, with fresh air preheating, exhaust fan and various safety design structures, can complete the glue discharge and sintering treatment in the same process without transferring the workpiece from the glue discharge furnace to the sintering furnace

Stainless steel exhaust hood

For the chemical reaction between materials and heating elements, the special heating elements used for sintering zirconia are more durable and have a longer service life

The protective gas interface required for purging the electric furnace with non flammable protective gas or reactive gas

Manual or automatic air supply system

The process box is used to improve the gas density and protect the furnace from pollution

Lifting furnace door

Motor driven exhaust cover, which can be switched by program

High temperature or catalytic exhaust gas cleaning system

Control and record the process through VCD software package