Hot press

The large oil cylinder piston of the desk top all-in-one machine with compact structure and simple

operation ensures the excellent parallelism of the pressing plate.

The double guide pillar design and the movable connecting piece ensure that the pressing plate expands after heating and there is no friction between the guide pillars. The low-pressure and high-pressure pumps provide pressure for the pressing plate and automatically switch to prevent the occurrence of pressure overshoot. The cooling system is equipped with compressed air purging to blow out the cooling water, so as to prevent the water from scaling in the pressing plate, which will reduce the heat transfer effect.

The periphery of the heating platform is surrounded by thermal insulating sheets, so that the heat of the pressing plate will not be transferred to other parts of the instrument. The hydraulic cylinder is a two-way motion cylinder. The cylinder wall is machined, the plunger is polished and the surface is

plated.

There is a dust ring on the cylinder. Strong adaptability to environmental change electric heating and water cooling system integration can customize special size and structure according to user requirements

The host structure is a very safe prototype. The standard configuration includes a pair of pressure cylinders and heatable plates. The hydraulic unit and tablet press are integrated, with control device. Special control requirements can be customized according to user requirements. The main machine consists of two pressing plates.

The lower pressing plate can move in two directions and is connected with the piston of the hydraulic cylinder. The two pressing plates are very parallel. Control system the standard pressure system is equipped with digital pressure and temperature controllers and timers, which are installed on the main control panel. Temperature, time and pressure can be controlled by touch screen. Multi channel programmable program control system (full-color touch screen, control)

can be selected for program control

The hydraulic unit and the electric motor drive pump unit are located under the control cabinet. The pump has a low-pressure oil supply system for mold closing and a high-pressure supply system

for increasing pressure.

The high and low pressure switch is automatic. The button on the control panel controls the start of the hydraulic unit.

The start-up and shutdown are controlled by the digital display pressure controller, and the pressure

is automatically controlled by the pressure control pump. The general user sets the pressure requirements, and the instrument realizes automatic control. In order to prevent the danger of overload, the pressure plate of the heating and cooling system equipped with a pressure reducing valve is a flat plate, which is a pressure plate integrating heating and cooling. It is machined. The basic pressure plate is electrically heated with a cooling channel. The design of the cooling channel is another very high cooling rate.