Fully automatic dry wet two in one dispersion system

characteristic:

★ the measurement principle of "dry measurement of dry samples, wet measurement of wet samples; instantaneous dispersion, instantaneous measurement" can be completely realized, fundamentally

The reliability of the test results is ensured;

★ it is the only fully automatic dry and wet two in one distributed system in the world, which is very convenient to use. With this instrument, the

The test of dry powder sample and slurry sample can be switched at will. It only takes 5 seconds with the click of the mouse

The fully automatic conversion of different dry and wet measurement methods does not need manual conversion at all, and the operation is very convenient.

★ both dry powder and slurry can be completely dispersed into single particles before testing;

★ fast test speed, no special sample preparation, especially suitable for factories and mining enterprises, research institutes, analysis and test centers and colleges and Universities

And so on.

★ features of dry process dispersion system:

1. the dispersion system is the only patented dry dispersion system in the world, which can disperse agglomerated powder as small as 0.1 micron

Complete dispersion.

2. the design of the dispersion tube is linear without any bending angle, which fully realizes the principle of instantaneous dispersion and instantaneous measurement.

3. the dispersion tube shall be made of special wear-resistant materials to ensure the service life of the dispersion tube at least 100000 times @ 2.5G Potland cement shall be tested each time.

4. the dispersion pressure is continuously adjustable according to the characteristics of the tested material.

5. the unique self-cleaning function enables the system to clean automatically after the test, and the next sample test can be carried out, avoiding the cross between different samples

Pollution, it is not necessary to fully open the dispersion system for cleaning after each sample test.

6. thousands of different types of dry process laser particle sizers have been used in different industries all over the world. Facts have proved that the dry process laser particle sizer of German new Patek company is indeed a particle sizer with excellent performance.

7. sample volume: mg kg, even a few large particles in the sample can be detected.

★ features of wet dispersion system:

1. integrated stainless steel dispersion tank: with high and low double liquid level controller, to realize full-automatic feeding and measuring

Test and discharge; Automatic detection of the volume of dispersion medium, with a volume of 400ml.

2. built in ultrasonic dispersion equipment: 0-60w adjustable ultrasonic energy output to disperse samples of different properties.

3. two agitated dispersers: auxiliary adjustable rate to achieve the best dispersion effect.

4. circulating and dispersing system of peristaltic pump: the circulating pipes are silicone rubber and fluororubber.

5. sample cell: stainless steel sample flow cell with a width of 2mm or 4mm.

6. automatic system self-cleaning function: avoid cross contamination between different samples.