Super depth of field 3D microscope system
Equipped with image elements to replace human eyes, it is a new microscopic system that can be observed on the LCD.
Only one machine is needed to complete all observations from 0.1 times low magnification to about 6000 times high magnification. It is widely used in research laboratories and production sites in electronics industry and other industries.
·The zoom lens can cover low magnification to high magnification.
·The image captured by the camera can be observed on the LCD.
·The camera unit is a separate design, which is easy to change the lens.
·It has the functions of image saving and measurement.
Zoom lens
Function:
1. Two dimensional measurement (distance, angle, radius, area, etc.)
2. Deep synthesis
3. 3D display
4. Split screen display (left and right, up and down, 4 split screens, 9 split screens, and linked display)
5. Image optimization (optical shadow effect mode; jitter correction function; bump emphasis function; HDR function; halo elimination; omni-directional multi-function lighting, etc.)
6. Auto focus function
7. Measurement function: automatic edge detection, automatic counting, area measurement, etc
8. Support one key automatic measurement
9. Support cleanliness analysis
10. One touch image correction
11. Measurement results can be saved in CSV format with one click
12. 2d/3d image stitching (up to 50000 pixels) × 50000 pixels)
13. Support navigation function
14. Comments can be added
XY axis direction
1. motor: 2-phase stepping motor
2. resolution: 1 μ m (typ.)
3. moving speed: 20 mm/sec (max)
4. movement: ± 50 mm
5. XY θ Platform size: 233 above × 185 mm (central circular plate ø 168)
6. bottom lighting: Yes
Platform load capacity: 5 kg
Self weight: about 20 kg