Small production type supersonic air mill

Using the continuous jet technology and adopting the new engineering design, the particle size distribution is further improved compared with the previous generation of products.

Principle of pneumatic crusher

Supersonic air flow pulverizer can meet the requirements of R & D, pilot test and air flow grinding technology based on continuous jet technology.

Only one ammonia source or air compressor is required for the air mill to work under constant temperature.

The powder is injected into the flat cylindrical grinding chamber with compressed air or ammonia in the tangential direction through the jet tube at a subsonic speed (about 50 m / s).

After entering the grinding chamber, the powder is accelerated to supersonic speed (300m / s) by the spiral air flow around the tube. When the slow-moving particles encounter the fast-moving particles, they are crushed to achieve the effect of particle refinement. Due to the centrifugal force, the large particles stay around the cavity wall, while the small particles are ejected from the grinding cavity with the gas.

*No dead angle, no material entrapment * no wear of moving parts * no grinding medium or lubricating oil contamination of crushed products

application

Cosmetic applications

Eye shadow, powder blusher, lipstick, Eyeliner

Advantages: smooth texture, smooth product, no excessive granularity

Cosmetics: particle size control

Brittle elasticity: crystalline fibers or polymers

Feed particle size: usually 75-150 μ m 800 μ m multi-element formulation wet or sticky