Temperature and climate test chamber

characteristic

Comfortable 8-inch TFT touch screen operation, with a backlight control panel to display the

operation mode.

• optimized network connection: authorized users can use the Internet to view current tests through the interface and network server. Test data and reports can be managed through the network. Simpati software can connect and utilize different tests.

• safety, comfort and excellence: VC ³ The series can maintain the required temperature and humidity value even under extreme conditions, such as the use environment similar to hot summer.

• lower maintenance costs: the humidification tray self-cleaning system can prevent the humidification water from being polluted, thus extending the cleaning interval

• the large capacity water tank enables the equipment to operate independently for several days - if an automatic water replenishment device is installed, it can also be extended without interrupting the operation.

• the combination of optimized air circulation system and adaptive control system ensures the uniformity of temperature in the test space.

Standard configuration

• digital measurement and control system simpac • 8-inch TFT color touch screen

• the control panel installed on the front of the equipment is used for temperature value display, test space lighting, equipment on / off, etc

• adaptive control system • Ethernet and USB interface • wet and dry bulb humidity measurement system, with automatic wetting and cleaning of its sensors

• sample anti condensation protection • air cooled refrigeration system

• stainless steel lead holes, Φ 50 mm and 125mm lead holes are respectively located on the left and right sides of the test chamber

• overtemperature safety circuit breaker with adjustable upper and lower temperature limits (for test sample protection according to en 60519-2 (1993)) and independent sensors

• sampling rack (stainless steel)

• adjustable Shockproof foot • 4-way electronic output (24V DC) • 4-way electronic input (24V DC)

• passive contacts for sample de energization • 2 temperature calibration points (+23 ° C and +80 ° C)

Others only for VC ³ Standard configuration for

• integrated humidity threshold monitoring system for humidity • large capacity water tank, easy to maintain

• automatic water replenishment device does not need to interrupt operation • humidity value display on control panel

• humidification tank cleaning for humidification water cleaning • 2 humidity calibration points (23 ° c/50% R.H. and 95 ° c/50% R.H

Options

• 3.5 inch color touch screen • simpati software for Windows systems

• gate with observation window, including laboratory lighting optimization • lead hole at gate

• the hinge is located on the right side of the test chamber • water cooling refrigeration system, which can be connected to the water tower, cooling water or tap water

• mobile casters for flexible installation • fan with controllable wind speed is used to adjust the amount of circulating air

• fresh air purging device is used to keep the circulating air clean • additional sample rack can make better use of the test space

• base plate reinforced to 300kg (340l only) • base plate reinforced to 500kg (600L only) • drawer with telescopic rail

• lead holes with diameters of Φ 50, 80 and 125 mm are used to test the sample connection • sample surface temperature measurement

• RS232 interface and other interfaces required by customers • special voltage or frequency

• digital input / output, 4 additional input interfaces and 4 output interfaces • additional calibration points

• additional calibration certificates (wkd factory calibration and DKD German calibration service)

• flat U-slots or U-slots for securing sample connections

• top lead holes prepared for some special test standards (automotive industry, photovoltaic industry, etc.)