Small sample adapter

The small sample adapter consists of a cylindrical sample cup and a rotor. It can be measured at a specified shear rate with DV - C. The sample volume is only 2 to 16ml.

Ultra low viscosity adapter

Ultra low viscosity adapter (ULA) is used with DV - C to measure the viscosity of low viscosity objects. It is suitable for Newtonian or non - Newtonian fluids.

Din adapter

The accessories comply with DIN 53019 in Germany, which is similar to ASTM in the United States.

This attachment is designed for customers who only have a small number of samples, and the sample volume only needs 16-20ml.

The cylindrical rotor can accurately calculate the shear rate.

Lifting bracket

It is installed on the motor of the lifting bracket, and the T-shaped rotor is connected to the viscometer through a special joint. The motor slowly moves the viscometer up and down, and the T-shaped rotor produces a spiral track diameter in the test sample, so as to eliminate the problem of "cavity".

Paddle rotor

Applicable to food, cosmetics, sealant and other industries

When the rotor is immersed in the sample, the structural damage of the sample is minimized, and the suspended state of the sample particles can be maintained during the measurement

heater

The test results between samples are consistent. The heater provides customers with a stable and accurate sample temperature test environment. In addition, the viscometer used with it has high accuracy, so the measured results are not only accurate, but also have good reproducibility. Suitable for viscosity measurement of hot sol and high temperature liquid