Portable field acidity measuring instrument

• special cable shielding design is used to break through the limitation of the cable length of the traditional pH meter. The measuring water depth range is up to 30 meters. The electrode connector is fully sealed and waterproof. The whole probe can be inserted into the water for measurement

• the probe is reinforced and protected, which can withstand slight collision and shoving; Replaceable electrode, economical and convenient for on-site maintenance

• all cable joints are equipped with stress relief devices to reduce material fatigue at the wiring and effectively extend the service life of the cable

• 1-point, 2-point or 3-point calibration selection,automatic buffer identification and automatic

temperature compensation

• the built-in non dispersive recorder can store 50 sets of readings, and the data will not be lost due

to power failure

• it is designed completely according to ergonomics, fully considering the special needs of field testing, and the built-in probe storage room is convenient for carrying acidity and temperature

measurement;

• Composite glass electrode, automatic temperature compensation. Fully watertight BNC electrode connector, the electrode can be replaced by itself in the field

technical parameter

PH electrode: glass composite electrode;

Temperature compensation: fully automatic;

Waterproof grade: IP65

PH calibration: 1-point, 2-point or 3-point calibration selection,

which can automatically identify the buffer;

Power supply: 6 No. 5 alkaline batteries,

operating life of about 100 hours, with low battery display;